Why HP 6930p laptop has the problem "Warning!!! machine not in committed state"
My laptop is HP 6930p, before long, I changed its motherboard; besides, I also ran hpsetcfg.exe to upgrade its serial numbers and its product number. But when I start it up, such a warning error prompts “Warning!!! Machine not in committed state”, cannot enter system, what should I do to solve the problem?
1) This is caused you haven’t defined the AMT function of the motherboard yet. The AMT function of motherboard is not in committed state, while new BIOS adds the function to inspect whether motherboard has been defined correctly and give prompt when starting relevantly. After replacing motherboard and updating latest BIOS version, if such warning information still occurs, then you need maintenance engineer define relevantly according to concrete model configuration? Please notice: such definition is one-off, irreversible. Before definition, you’d have to make a right judgement whether the machine supports AMT function.
2) Here’s the method to judge whether certain machine supports AMT function:
Check up the Intel CPU label on salver area, if there are the letters “vpro”, then it supports AMT function, you’d have to enable AMT function when define; otherwise, it doesn’t support AMT function, you’d have to disable it when define.